A malfunction of central locking is quite annoying. Regularly it can also be dangerous, simply because you can be stuck in your vehicle. Depending on the vehicle models, the central locking systems are activated automatically when you close the doors, for others it is necessary to activate it manually. We will now discover what will be the most common malfunctions and what to do to remedy them.jeep-cherokee-centralized-closure-problem

The central locking of your jeep cherokee no longer works

Certain symptoms may assist you in detecting the failure. Particularly depending on the number of doors that have this problem. Let's take a closer look.

jeep cherokee: central locking does not work on one of the doors

To start, try to lock the door manually. If this does not present any complication, it implies that your system is in good condition. Your problem must therefore come from elsewhere upstream. In general it is a problem originating from a short circuit. To verify it is very easy! You will need to disassemble the interior of the door from your jeep cherokee by removing the covers. Follow the wiring from the closing mechanism. Consequently, inspect the wiring but also the condition of the wiring. So you have to fix the problem you found. When on the other hand closing is impossible manually and with the buttons, this implies that it is the system which presents a problem. Don't worry, just grease it or replace it with a new one if it is really worn out.

jeep cherokee: central locking does not work anymore

This is a very upsetting problem. The central locking of the jeep cherokee really doesn't work anymore. The root of the problem is not easy to locate. Let us therefore see the most common malfunctions.

Replace fuses on your jeep cherokee

The problem may be caused by a fuse wire rack. It is very easy to perceive visually. In this case you know perfectly what to do, just replace it. It is a fairly rare problem however it could happen.

General feeding problem

When your vehicle has a general power problem, it is exceptional that only the closure is impacted. So don't worry, it's certainly not that problem you won't be on this article if it was. However, sometimes there is a problem of contact between the power supply and the central locking mechanism. The connection must be cleaned or the wiring replaced. It is simple to repair , the most complicated thing is to find the short circuit.

jeep cherokee: Change your key battery

It is only possible that the key has no more battery! We can sometimes omit this phenomenon, however it is the key that controls the closure system. In this case it is all the more easy , just open the key a bit, with a flat screwdriver for example, and replace the battery in it. Do not hesitate to leave a comment if your problem is not present in this post, in order to help other Internet users! See you soon.