A central locking problem is quite annoying. Sometimes it can also be risky, as you can get stuck in your vehicle. Depending on the range of cars, centralized locks engage automatically when the doors are closed, for others it must be operated manually. In this article, we will find out what the most common problems will be and how to go about solving them.problem-closure-centralized-Jeep-Comanche

The central locking of your Jeep Comanche no longer works

Some clues will help you find the breakdown. In particular according to the number of doors that have this concern. So let's take a closer look.

Jeep Comanche: central locking no longer works on one of the doors

First, try to lock your door manually. When this does not present a complication, it shows that the mechanism is in good condition. Your concern comes from the other hand upstream. In most cases it is a concern originating from a break in the electrical circuit. So to control it is very convenient! You will have to dismantle the inside of the door of your Jeep Comanche by removing the trim. Follow the cabling that goes from the locking system. Examine the wiring but also the condition of the wiring. It will thus be necessary to repair the problem that you have unearthed. When despite everything the closing is difficult manually and electrically, this shows that it is the mechanism which presents a problem. Don't worry, just lubricate it or replace it if it is completely damaged.

Jeep Comanche: central locking no longer works at all

This is a concern that can become very annoying. The central locking of this Jeep Comanche no longer works at all. The cause of the concern is not easy to locate. We will in fact see the most common problems.

Replace fuses on your Jeep Comanche

The concern may come from a fuse wire rack. It is very easy to recognize visually. In this case you can fully imagine the procedure, you just have to replace it. This is a fairly rare concern however it could happen.

General feeding problem

When your automobile has a general power supply problem, it is very rare that just the closing no longer works. So rest assured, this is probably not your concern and you would not be on this page right now. However, it is sometimes possible that there is a problem with the electrical connection between the power supply and the central locking system. You will have to deoxidize the connection or change the wire. It is easy to repair , should we still find the short circuit.

Jeep Comanche: Change the battery in your key

It is only possible that your key no longer works! You can sometimes forget about this problem, but it is your key that controls the locking system. In this case it is enough commode , it is enough to open this key, with the help of a flat screwdriver for example, and to replace the battery inside. Do not hesitate to write a comment if your concern is not in this guide, in order to help other Jeep Comanche owners! Good road.