A central locking malfunction is quite annoying. Occasionally it can also be dangerous, as you can get stuck inside. Depending on the vehicle range, centralized closures are activated automatically when the doors are closed, others will have to do it alone. We will therefore see in this article what will be the most regular problems and how to fix them.centralized-closure-problem-Jeep-Wagoneer

The central locking of your Jeep Wagoneer no longer works

Different symptoms can help you detect the fault. In particular depending on the number of doors affected by your malfunction. So let's take a closer look at this.

Jeep Wagoneer: central locking no longer works on one of the doors

First try to lock your door manually. When it doesn't show a problem, your system is OK. Your dysfunction therefore comes upstream on the other hand. Usually it is a malfunction resulting from a break in the electrical circuit. To control it is very easy! You will need to open the door of this Jeep Wagoneer by removing the covers. Reassemble the electric cables which leave the closing device. So check the electrical connections but also the condition of the wiring. It is therefore necessary to rectify the dysfunction which you will have found. If, despite everything, the closing is hard manually and electrically, it is because the system has a malfunction. Don't panic, you just need to lubricate it or replace it if it is totally defective.

Jeep Wagoneer: central locking no longer works at all

Here is a dysfunction which can become very annoying. The central locking of this Jeep Wagoneer no longer works at all. The cause of the malfunction is not easy to reveal. So let's take a look at the most common problems.

Replacing fuses on your Jeep Wagoneer

The malfunction could come from a fuse gate. It is rather easy to recognize visually. In this case you know very well what to do, you just have to replace it. This is a fairly rare malfunction but it can happen.

General feeding problem

If ever your vehicle has a general power supply malfunction, it is exceptional that just the closure is affected. So rest assured, this is most likely not your dysfunction and you would not be on this page right now. However, it is sometimes possible that a contact malfunction is found between the power supply and the central locking device. You have to deoxidize the connection or change the wiring. It is simple to repair , should we still find the false contact.

Jeep Wagoneer: Changing the battery in your key

It just happens that your key has run out of battery! We can regularly omit this phenomenon, however it is your key that controls the locking system. In this case it is all the more tailored , just remove your key, using a screwdriver, and replace the battery inside. Do not hesitate to write a comment in case your malfunction is not within this guide, to help other Jeep Wagoneer owners! Be careful.