A central locking problem is quite annoying. Sometimes it can even be dangerous, simply because you can get stuck in your car. Depending on the vehicle styles, the centralized locks are activated automatically when closing the doors, for others it will have to be activated manually. So here we are going to find out what are the most common problems and what to do to fix them.problem-closing-centralized-Suzuki-Alto-2

The central locking of your Suzuki Alto 2 no longer works

Some clues will help you to detect the failure. Among other things depending on the number of doors that have this malfunction. Let's take a closer look.

Suzuki Alto 2: central locking does not work on one of the doors

First of all try to lock the door manually. If this does not show a problem, it shows that the system is in good working order. Your dysfunction thus comes from another place upstream. In principle it is a malfunction resulting from a short circuit. In order to control it it's very simple! You will need to disassemble the interior of the door of this Suzuki Alto 2 by removing the trim. Follow the electrical wires from the locking device. Check the electrical connections and the condition of the wiring. You will therefore have to rectify the malfunction that you have found. If on the other hand closing is impossible manually and with the buttons, this shows that it is the system which has a malfunction. Do not panic, just lubricate it or change it if it is really defective.

Suzuki Alto 2: central locking no longer works at all

It is a dysfunction that is very annoying. Central locking of your Suzuki Alto 2 no longer works at all. The cause of the malfunction is not obvious to find. We will thus see the most common problems.

Replace fuses on your Suzuki Alto 2

The malfunction can result from a fuse wire rack. This remains fairly easy to discern visually. In this case you know perfectly what to do, just change it. This remains a fairly rare dysfunction however it can happen.

General feeding problem

If your automobile has a general power malfunction, it is very rare that only the closure does not work. So do not be worried, this is probably not the malfunction you will not be on this article if it was. However, it sometimes happens that there is a malfunction of contact between the power supply and the central locking device. You will need to deoxidize the connection or replace the wire. It stays simple to repair , the most complicated thing is to find the false contact.

Suzuki Alto 2: Change the battery in your key

The key may simply be out of battery! We can occasionally omit this phenomenon, however it is the key that directs the closure system. In this case it’s enough easy , you just need to open the key, using a screwdriver, and change the battery inside. We invite you to write a comment if your dysfunction does not appear inside this post, to help our readers! Good road.