A malfunction of central locking is relatively annoying. Regularly it can even be dangerous, simply because we can be stuck in it. Depending on the vehicle styles, the centralized closings are activated automatically when you close the doors, for others it is necessary to operate it manually. We are going to see with this article what will be the most frequent problems and what are the solutions to repair them.problem-centralized-closure-Toyota-Aygo-2

The central locking of your Toyota Aygo 2 no longer works

Different clues can assist you in finding the breakdown. In particular compared to the number of doors concerned by your concern. Let’s take a closer look.

Toyota Aygo 2: central locking no longer works on one of the doors

To start, try to lock the door manually. If this does not present a problem, it means that your device is operational. Your concern actually comes from another place upstream. In most cases it is a concern originating from a break in the electrical circuit. In order to verify it, it is super convenient! You will need to dismantle the inside of the door of your Toyota Aygo 2 by removing the trim. Reassemble the electric cables which leave the closing device. Check the wiring but also the condition of the cable. It will thus be necessary to rectify the concern in question. If, on the other hand, the closing is hard manually and electrically, this means that it is the device that has a problem. Don't worry, just grease it or change it if it is completely worn out.

Toyota Aygo 2: central locking does not work at all

This is a concern that is super annoying. The central locking of this Toyota Aygo 2 really doesn't work anymore. The cause of the concern is not easy to locate. We will see in fact the most common concerns.

Changing fuses on your Toyota Aygo 2

The concern could come from a fuse wire rack. It remains rather easy to recognize visually. In this case you know very well what to do, you just have to change it. This remains a relatively rare concern however it can happen.

General feeding problem

If your car has a general power supply problem, it is rare that only the closing does not work. So don't worry, it probably isn't that concern and you wouldn't be on this page right now. However, sometimes there is a problem with the electrical connection between the power supply and the central locking device. The connection will need to be deoxidized or the wire replaced. It stays easy to repair , the most complicated is to discern the false contact.

Toyota Aygo 2: Change the battery in your key

It just happens that the key no longer works! We can sometimes omit this problem, but it is the key that drives the locking system. In this case, it's even more easy , you just need to half-open this key, using a flat screwdriver for example, and change the battery in the key. We invite you to leave a comment if your concern is not found in this post, to help our readers! See you soon.