Mechanics is a relatively Cartesian field. However, if there is indeed a phenomenon which is sometimes difficult to understand, it is an unstable idle or losses of acceleration. Whether for a Hyundai Kona, or any other type of automobile. However, we can help you understand. Undeniably, the cause can come from a large number of engine components, or even electronics. To detect the nature of the breakdown of this Hyundai Kona, we will have to follow a fairly simple procedure. But above all, we will see the symptoms of a faulty idle.idle-problem-Hyundai-Kona

Idling problem on a Hyundai Kona: symptoms

Un unstable idle close to stall . This is completely the most common idle problem. This feeling that the engine will stall while driving at a normal speed, or that the Hyundai Kona grazes . It even happens that the vehicle stalls. In this situation, it is really dangerous for the driver. In this case, do not delay in worrying about it. We suggest that you carry out a diagnosis via the paragraph below. We can also understand that the Hyundai Kona has a acceleration problem . More report in this case with an idle problem. Losses of power and acceleration holes may appear for many reasons. Avoid confusing these two symptoms. We invite you to read our files concerning power losses.

Hyundai Kona: developing a diagnosis to understand the origin of idling

You have to start by performing several extremely simple checks, before going into more detail.

Idling of the Hyundai Kona: exhaust fumes.

A black smoke comes out of the exhaust. It often means that the air and fuel mixture is bad. Or that your air filter is clogged. In both cases, an idling problem can appear on your Hyundai Kona. A White smoke comes out of the exhaust. In this case again it may be due to a disturbance. White smoke is often water vapor. It is therefore likely that it is an intake or cylinder head gasket problem.

Engine components check

As we have shown, an idling problem on a Hyundai Kona can be the result of many factors. So try to run the engine carefully. However, it is suggested to be extremely careful and not to touch the engine components too much, as this may aggravate the breakdown or divert the source of the problem. We obviously suggest that you go to a mechanic for a more suitable audit. Here are the elements to check point by point.

  • The first thing to do is check all of the hoses . These can be pierced or even detached.
  • It will also be necessary to check the sensors and sensors of your engine. It is however difficult to verify that they are working properly. You can find tutorials on youtube, and it usually requires electronic devices.
  • Perform a check of pressures hydraulic. Again, the pressure controls require appropriate tools.

Idling problems are common, however, are complex to diagnose. A visual check on the Hyundai Kona will allow you to have an idea, however it is better not to venture into amateur DIY.