Nothing is more unpleasant than key that no longer works . And everyone knows, locksmithing is a very expensive area. All the more on a car, because if you have to change a lock, you will have to do it on all the other doors of your Suzuki X90. So before getting a quote from a locksmith, let's see if there are cheaper methods of doing repairs on your own. For this, we will take a tour of the most common dysfunctions and what can be the potential solutions to this concern.
The door lock of my Suzuki X90 is completely blocked
You can insert your key to the bottom of the Suzuki X90 lock, however impossible to rotate . In this situation, a very simple check must be made. If this is the case on all of your locks, it is because the problem came from the key, of course. If however this is the case only on one door, it is obviously the lock that gets stuck. So the first thing to do is insert WD40. This anti-seize is widely used in the automotive sector. Usually it solves more dysfunctions than you might think. It is also possible that a component has been inserted into the lock and prevents its proper functioning. In this situation, a locksmith can fix it for you. Ultimate solution, change your lock…
The key no longer fits fully in the door of the Suzuki X90
The concern can arise from several factors. The first is that your key is bent. If that's right, you'd be hard pressed to open all of the doors on your Suzuki X90. You can then try to straighten it gently. Also, it is conceivable that the lock is just dirty. You must then grease the lock or introduce anti-seize like WD40. By dint of turning the key without forcing either, the door should open. It is almost inadmissible that a resistant component should infiltrate the lock, unless someone has tried to force it.
The key turns in the lock, however the Suzuki X90 does not open
The first thing to do is to infiltrate another door and try to initiate it from the inside. If there too there is nothing to do, then the lock of the Suzuki X90 is undeniably defective. You can still apply anti-seize in the mechanism, but unfortunately it is unlikely to work. Unfortunately, you have only one solution, call your locksmith.