There is nothing as annoying as key that no longer works . And everyone knows, the locksmith is something very expensive. Especially for an automobile, because if you have to replace a lock, you must do it for all the other doors of your Toyota Aygo. So before getting a quote from a locksmith, let's see if there are less expensive methods of doing repairs yourself. For this, we will go around the most common dysfunctions and what can be the possible solutions to this concern.
The door lock of my Toyota Aygo is completely blocked
You manage to insert your key fully into the lock of the Toyota Aygo, however impossible to rotate . In this case, a very simple check must be made. If this is the case on all the locks, it is because the problem must come from the key, obviously. If, on the other hand, this is only the case on one of the doors, it is obviously the lock that gets stuck. So the first thing to do is insert WD40. This anti-seize is widely used in the automotive sector. Usually it solves more dysfunctions than you might think. It is also likely that a component has entered the lock and is blocking its proper functioning. In this case, a locksmith can fix it for you. Ultimate solution, change your lock…
The key no longer fits completely in the door of the Toyota Aygo
The concern can come from several things. Firstly, your key is bent. If so, you'd be hard pressed to open all the doors of this Toyota Aygo. You can also try to straighten it gently. Otherwise, it is possible that the lock is only congested. In this case, you will have to oil the lock or introduce anti-seize like WD40. By turning the key without forcing too much, the lock should end up working. It is virtually inadmissible for a solid component to enter the lock, unless a person has tried to force it.
The key turns in the lock, however the Toyota Aygo does not open
One of the first things to do is to infiltrate another door and try to start it from the inside. If there too nothing happens, then the lock of your Toyota Aygo is effectively damaged. You can try to introduce an anti-seize in the mechanism, but unfortunately there is little chance that it works. Unfortunately, you only have one solution, call your locksmith.