When you want to go on vacation, there is nothing more annoying than a blocked trunk. And everyone knows that locksmithing is a super expensive business. Especially on an automobile, because if it is necessary to change the trunk lock, you will have to do it on all the other doors of the Honda Z600. So before bringing in a locksmith, we will see if there are cheaper solutions by carrying out repairs yourself. To do this, we are going to take a look at the most frequent concerns and what will be the potential solutions to this problem.Honda-Z600-lock-problem

The key no longer fits fully in the lock of the trunk of the Honda Z600

The concern can arise from a variety of reasons. First, your key is bent. If so, you would be hard pressed to open the doors of the Honda Z600. You can then try to straighten it gently. Otherwise, it is also possible that the lock is simply dirty. It will therefore be necessary to lubricate the lock or apply anti-seize compound such as WD40. By dint of playing your key without forcing either, the lock will eventually activate. It's almost impossible for a solid item to fit inside your safe's lock, unless someone has tried to force it.

The key turns in the lock, however the trunk of the Honda Z600 does not open

The first thing to do is enter through a door and try to open the trunk from the inside. If again nothing happens, then the lock of your Honda Z600 is probably in bad condition. You can still apply anti-seize to the inside of the mechanism, but honestly there's little likelihood of that working. Unfortunately, you have only one solution, go see a locksmith.

The lock of the trunk of my Honda Z600 is completely blocked

You manage to enter your key completely in the lock of the Honda Z600, however impossible to rotate . In this situation, you will have to make a simple observation. If this is also the case for the doors, it is because the concern must come from the key, of course. If on the other hand this is not the case only for the trunk, it is obviously the lock which blocks. In this case, the first step is to introduce WD40. This anti-seize agent is widely used in mechanics. Often it solves more problems than you might think. It is also possible that an element has inserted itself into the lock and is blocking its operation. In this situation, only a locksmith will be able to fix it for you. Last solution, change your lock ...