When you want to go on vacation, there is nothing more unpleasant than an inaccessible safe. And everyone knows, locksmithing is a very expensive area. All the more so on a car, because if it is necessary to change the trunk lock, it must be done on each of the other doors of the Nissan Qazana. So before bringing in a locksmith, let's see if there are not cheaper procedures for doing repairs yourself. For this, we will take a tour of the most common problems and what can be the possible solutions to this dysfunction.problem-lock-trunk-Nissan-Qazana

The key no longer fits fully into the boot of the Nissan Qazana

The dysfunction can come from various things. First, is that your key is curved. If so, you'd be hard pressed to open the doors of your Nissan Qazana. You will then have to try to gently bend it. Otherwise, it is also possible that the lock is simply cluttered. It will therefore be necessary to oil the lock or apply anti-seize such as WD40. By dint of turning your key without forcing either, the lock must end up activating. It is practically improbable that a resistant element infiltrates the lock of your trunk, unless a person tried to force it.

The key turns in the lock, but the boot of the Nissan Qazana does not open

The first step is to infiltrate through a door and try to open the trunk from the inside. If there too nothing happens, then the lock of your Nissan Qazana is probably in bad condition. You can still put an anti-seize on the inside of the device, but unfortunately there is little chance that it will work. Unfortunately, that leaves you with only one solution, call a locksmith.

The trunk lock of my Nissan Qazana is completely blocked

You manage to insert your key completely into the lock of the Nissan Qazana, but impossible to rotate . In this situation you have to do very simple control. If this is also the case for the doors, it is because the malfunction comes from the key, obviously. If however this is only the case for the trunk, it is of course the lock that blocks. In this situation, the first step is to put WD40. This anti-seize is the most used in mechanics. Usually it solves more problems than you might think. It is also possible that an element has been inserted in the lock and prevents its operation. In this situation, a locksmith can help you. If none of this works, you will need to change your lock…