Let's not confuse the air conditioning , heating and ventilation of this Hyundai Kona. Heating and air conditioning are systems that will reduce or increase the air temperature. The first by means of the heat emitted by the engine, and the second with the help of a liquid refrigerant . Your ventilation is all of the circuits and mechanisms that give the opportunity for air to get inside the vehicle. The essential component is kicker which sends air into your vehicle. If there is little or no air supply, it is certainly a malfunction of ventilation. We will see in this text how ventilation works, in order to better perceive dysfunctions and understand the technique to remedy them.
How a ventilation works on a Hyundai Kona
The ventilation is primarily used to circulate the air inside the passenger compartment of this Hyundai Kona. Regarding the pulser, it usually consists of a resistor, a turbine, and a motor. The lower the integral resistance of the circuit, the faster the turbine turns. By turning the switch in the passenger compartment, the resistance is thus reduced.
Hyundai Kona: frequent ventilation problems
Dirty air ducts
When the ventilation works but a small amount of air enters the cabin of this Hyundai Kona, it is conceivable that your air shutters are blocked. Thanks to a screwdriver flat, you can remove the covers from the air vents. It will suffice to look into them if they are obstructed. If this is the case you can scour them, but also the valves.
Dirty cabin filter
If you ever feel fumes and this ventilation is weak, the malfunction probably comes from the cabin filter of this Hyundai Kona. It gets dirty and piles up bacteria with the years. It is completely normal for it to be dirty, it is there to filter the air that reaches us. There is no manufacturer's instruction on when to change it. We simply advise you to disassemble it, check its condition. When the latter is completely dirty, it must be replaced.
Resistance of the blower HS
When the Hyundai Kona's ventilation settings are working poorly, or really not, it's probably related to the resistance. This resistance used to raise the voltage to increase the speed of this turbine. An inconsistent dysfunction of this ventilation is undoubtedly linked to a resistance malfunction. This microchip is difficult to troubleshoot. It will have to be replaced.
HS blower motor
There are several relatively common malfunctions regarding the blower. The brushes may be worn out. Over time, they may wear out and produce electrical faults. Your fan may spin very randomly, or even stop operating at all. In addition, the malfunction may come from bearings of the motor. When the ventilation makes a sharp noise, comparable to a rusty mechanism, it can happen that its bearings require lubrication. We invite you to comment on this text in case your dysfunction is different to help internet users. Good walk!