Do not confuse the air conditioning , heating and ventilation of this Jeep Ford. Heating and air conditioning are mechanisms that give the possibility of lowering or increasing the temperature. The first with the help of the heat emitted from the engine, and the second with the help of a fluid refrigerant . Ventilation is all of the circuits and mechanisms that will allow air to arrive inside the vehicle. The fundamental element will be the kicker which emits air into your cabin. If there is very little or no air supply, it is probably a ventilation problem. We will see in this post how a ventilation works, to be able to better identify the concerns and apprehend the technique to remedy them.problem-ventilation-Jeep-Ford

How a ventilation works on a Ford Jeep

The ventilation is used to begin to regenerate the air in the passenger compartment of this Jeep Ford. For the blower, it usually consists of a resistor, a turbine, and a motor. The more the total resistance of the circuit is reduced, the faster the turbine operates. By turning the switch in the passenger compartment, the resistance is lowered.

Jeep Ford: regular ventilation problems

Dirty air ducts

If the ventilation works but little air arrives in the passenger compartment of this Jeep Ford, it is plausible that the air shutters are obstructed. With the aid of screwdriver flat, do not hesitate to remove the air shutter covers. It is only necessary to look inside if they are blocked. If this is the case, do not hesitate to clean them, but also the valves.

Dirty cabin filter

If you ever notice odors and this ventilation is weak, the problem must probably come from the cabin filter of this Jeep Ford. It is blocked and piled up bacteria with the years. It is really common that it is dirty, it is used to filter the air that reaches us. There is no manufacturer's recommendation as to when to replace it. It is simply advised to remove it, look at its condition. If it is particularly dirty, it will be necessary to change it.

Resistance of the blower HS

If the ventilation setting of the Jeep Ford ever goes wrong, or even not at all, it is probably linked to the resistance. This resistance allows to raise the voltage to increase the speed of this turbine. A bizarre malfunction of this ventilation is probably linked to a resistance problem. This electronic chip is complex to repair. It is necessary to change it.

HS blower motor

There are several fairly common concerns about the kicker. The brushes can be damaged. As time goes by, they can be damaged and produce electrical faults. The pulser could operate very randomly, and even not rotate at all. It is also possible that the problem comes from bearings of the fan motor. If the ventilation makes a high-pitched noise, such as rusty mechanics, its bearings may require lubrication. Feel free to comment on this post if your problem is different to help our readers. Enjoy the road!