Do not confuse the air conditioning , heating and ventilation of the Jeep Renegade. Heating and cooling are systems that will lower or increase the air temperature. The very first with the help of the heat generated from the engine block, and the second with the help of a fluid refrigerant . The famous ventilation is the totality of the circuits and devices which will allow the air to arrive inside the vehicle. The main element will be the kicker which sends air into your cabin. If there is little or no air supply, it is certainly a ventilation problem. We will see in this guide how ventilation works, so as to better identify malfunctions and assimilate the technique to remedy them.problem-ventilation-Jeep-Renegade

How a ventilation works on a Jeep Renegade

Ventilation is primarily used to regenerate the air inside the interior of the Jeep Renegade. Regarding the pulser, it is usually composed of a resistor, a turbine, and a motor. The more the total resistance of the circuit is lowered, the faster the turbine operates. By turning the switch in the passenger compartment, the resistance is therefore reduced.

Jeep Renegade: usual ventilation problems

Dirty air ducts

When the ventilation turns but a small amount of air enters the interior of the Jeep Renegade, it is conceivable that your air shutters are blocked. With the aid of screwdriver flat, do not hesitate to remove the air flap valves. It is only necessary to check in if these are clogged. If this is what is happening do not hesitate to scour them, but also the valves.

Dirty cabin filter

If you ever notice odors and the ventilation lacks power, the problem probably arises from the cabin filter of the Jeep Renegade. It becomes blocked and accumulates bacteria with time. It is completely normal that it is clogged, it serves to clarify the air which reaches us. There is no recommendation from the manufacturer as to when to replace it. We simply advise you to remove it, check its condition. When it is particularly dirty, it will need to be changed.

Resistance of the blower HS

When the ventilation buttons on the Jeep Renegade do not work well, or not at all, it is probably due to the resistance. This resistance allows to increase the voltage to increase the speed of the turbine. A strange functioning of the ventilation can be linked to a resistance problem. This little microchip is complicated to troubleshoot. It will have to be changed.

HS blower motor

There are two relatively regular malfunctions concerning the blower. The brushes can be damaged. Over time, these can deteriorate and cause false contact. The fan may run randomly, and may not even operate at all. It is also possible that the problem stems from bearings of the motor. When the ventilation makes a sharp noise, such as a rusty mechanism, the bearings may lack lubrication. Do not hesitate to comment on this guide in case your problem is different in order to help our readers. See you soon!