Do not confuse the air conditioning , heating and ventilation of this Kia Provo. Heating and air conditioning are systems that offer the possibility of decreasing or increasing the temperature. The first through the heat produced from the engine block, and the second with the help of a fluid refrigerant . Ventilation is the set of channels and mechanisms that allow air to enter the passenger compartment. The essential component is kicker which propels the air within your vehicle. If the air barely or never comes, it is certainly a ventilation problem. We will see in this article how a ventilation works, so as to better perceive the problems and understand by what means to remedy them.ventilation-problem-Kia-Provo

How ventilation works on a Kia Provo

The ventilation is primarily used to regenerate the air in the cabin of this Kia Provo. For the blower, it is often made of a resistor, a turbine, and a motor. The lower the total resistance of the circuit, the faster the turbine turns. By turning the button in the passenger compartment, the resistance is therefore reduced.

Kia Provo: common ventilation problems

Dirty air ducts

If the ventilation ever works but a small amount of air arrives inside the cabin of this Kia Provo, it is likely that the air shutters are clogged. Thanks to a screwdriver flat, it is possible to dismantle the valves of the air vents. It will suffice to check in if they are congested. When this is the case, it is possible to dust them, but also the valves.

Dirty cabin filter

If you ever notice fumes and this ventilation lacks power, the problem probably comes from the cabin filter of this Kia Provo. This clogs and accumulates bacteria with time. It is quite common that it is dirty, it is there to purify the air that reaches us. There is no manufacturer's instruction on when to replace it. We only advise you to remove it, check its condition. If it is particularly dirty, it must be replaced.

Resistance of the blower HS

If the Kia Provo's ventilation settings never work well, or really not, it's probably due to the resistance. The resistance allows to increase the voltage to increase the speed of this turbine. An inconsistent malfunction of this ventilation can be due to a resistance problem. This microchip is complicated to troubleshoot. It will have to be replaced.

HS blower motor

There are several fairly common problems with the kicker. The brushes may be worn out. The more time passes, they can be damaged and generate false contact. Your fan may run randomly, or even not activate at all. The problem may also arise from bearings of the fan motor. If the ventilation system ever makes a hissing sound, comparable to a rusty mechanism, its bearings may lack lubrication. We invite you to comment on this article if your problem is different to help users. Good walk!