Do not confuse the air conditioning , heating and ventilation of the Seat Ginebra. Heating and air conditioning are mechanisms that lower or increase the air temperature. The very first thanks to the heat emitted by the engine block, and the other with the help of a liquid refrigerant . Your ventilation is all of the circuits and mechanisms that will allow air to enter the vehicle. The fundamental element will be the kicker which propels the air into your cabin. In the event that little or no air comes in, it is probably a malfunction of ventilation. Thanks to this text, we will discover how ventilation works, in order to better identify malfunctions and understand by what means to remedy them.ventilation-problem-Seat-Ginebra

How ventilation works on a Seat Ginebra

The ventilation is used initially to regenerate the air in the passenger compartment of the Seat Ginebra. Regarding the pulser, it usually consists of a resistor, a turbine, and a motor. The lower the integral resistance of the electrical system, the faster the turbine turns. By rotating the switch in the passenger compartment, the resistance is therefore reduced.

Seat Ginebra: regular ventilation problems

Dirty air ducts

If the ventilation turns but very little air enters the passenger compartment of the Seat Ginebra, it is possible that these air flaps are blocked. Thanks to a screwdriver flat, do not hesitate to dismantle the air flap valves. It will suffice to check inside if these are blocked. When this is the case, do not hesitate to dust them, but also the shutters.

Dirty cabin filter

When you smell odors and the ventilation is weak, the malfunction probably comes from the interior filter of the Seat Ginebra. It is blocked and piled up bacteria with time. It is completely normal that it is dirty, it is there to filter the air which reaches you. There is no recommendation from the manufacturer as to when to replace it. We simply advise you to remove it, check its condition. In case the latter is really black, it will be better to change it.

Resistance of the blower HS

If the buttons on the Seat Ginebra's ventilation are not working well, or not at all, it is probably linked to the resistance. The resistance increases the voltage to amplify the speed of the turbine. A strange malfunction of the ventilation can be due to a malfunction of resistance. This microchip is difficult to repair. You will have to change it.

HS blower motor

There are several fairly regular malfunctions on the blower. The brushes may be damaged. As time goes by, they can wear out and produce electrical faults. The pulser can operate very randomly, and even stop working at all. In addition, the malfunction may come from bearings of the fan motor. In the event that the ventilation makes a sharp noise, comparable to a rusty mechanism, it happens that the bearings lack lubrication. Do not hesitate to comment on this text when your dysfunction is different in order to help other readers. Good road!