Do not confuse the air conditioning , heating and ventilation of the Toyota Model F. Heating and air conditioning are systems that lower or increase the temperature. The first through the heat emitted from the engine, and the second with a liquid refrigerant . Your ventilation is the totality of the ducts and systems which give the possibility of air to reach the cabin. The fundamental component is the kicker which emits air into your vehicle. If the air hardly or not at all arrives, it is undoubtedly a problem of ventilation. We will see in this guide how ventilation works, in order to better perceive dysfunctions and assimilate by what means to remedy them.
How a ventilation works on a Toyota Model F
The ventilation is used first to circulate the air in the interior of the Toyota Model F. Regarding the blower, it is usually made of a resistor, a turbine, and a motor. The lower the integral resistance of the circuit, the faster the turbine runs. By turning the switch in the vehicle, the resistance is thus reduced.
Toyota Model F: usual ventilation problems
Dirty air ducts
If the ventilation works but a small amount of air arrives in the interior of the Toyota Model F, it is possible that these air flaps are clogged. With the aid of screwdriver flat, you can remove the covers from the air vents. You just have to check in if they are congested. When this is the case you can dust them, but also the valves.
Dirty cabin filter
When you perceive fumes and this ventilation is weak, the problem probably comes from the cabin filter of the Toyota Model F. This becomes blocked and piled up with bacteria with time. It is really normal that it is dirty, it is there to purify the air that reaches us. There is no manufacturer's instruction as to when to replace it. We only advise you to remove it, look at its condition. If it is particularly dirty, it will need to be replaced.
Resistance of the blower HS
If the ventilation control of the Toyota Model F malfunctions, or even really does not, it is probably due to the resistance. The resistance increases the voltage to increase the speed of the turbine. An inconsistent malfunction of this ventilation is probably due to a resistance problem. This small electronic chip is complex to repair. It needs to be replaced.
HS blower motor
There are several fairly common malfunctions regarding the blower. The brushes are deteriorated. Over time, these can be damaged and cause false contact. The fan may spin randomly or even not work at all. It also happens that the problem comes from bearings of the fan motor. If the ventilation makes a sharp noise, comparable to a rusty mechanism, it can happen that its bearings lack lubrication. Do not hesitate to comment on this guide if your problem is different to help our readers. Good walk!