Having a front wiper problem is not uncommon. This is also one of the most usual concerns, and not only on the Hyundai Ioniq. Windshield wipers have become consumables because they wear out quickly and are easy to change . But the concerns can be quite different, and the causes will therefore vary. This may arise from broom , engine , or a electric problem among others. We will see the most usual symptoms, then how to remedy them.
Complete failure of the front wiper of your Hyundai Ioniq
The problem is undoubtedly the engine of your front wiper. In case you want to check it, you need to measure the electric current at the input of the wiper motor. But it is a precaution that is not fundamentally mandatory. The failure was probably caused by the engine. In this case you have to buy a new engine, suitable for your Hyundai Ioniq . It is also conceivable that the problem comes from broom training . In this situation, make it activate manually. In the event that it moves on its pivot without problem, it means that it does not show any problem.
The front wiper of your Hyundai Ioniq is noisy
A noisy front wiper on a Hyundai Ioniq is not a serious problem, but it is quickly unpleasant. If you get a shrill noise is that it must come from the wear of the rubber blade of the broom. As if you were operating it on the dry windshield. In this situation there you probably have to change it. In case it is a squeaky noise , it is certainly the training which is a bit seized. Then just lubricate it, and the problem will be solved.
Hyundai Ioniq's front wipers don't go at the right speed
This time it's a problem that can be problematic, especially during heavy rain and the front wipers are unusually slow. To give you an idea, at maximum speed, the speed is about one round trip per second. If they are indeed much slower, the reasons could be multiple. But there is a strong probability that it is the engine which is in question. You can always remove components to perceive what slows down operation. Be careful not to scratch the windshield. It is also likely that the state of wear of the broom brakes the mechanism. In this situation, it will suffice to change the brushes .