Turnkey portes getting stuck or struggling to open, it can be tiring over time. If you ever get tired of slipping by the doors of the passenger or by the trunk of this Toyota I-unit (a little ridiculous), or even failing to enter at all, we will see here what the situations are but also how to resolve them.door-opener-Toyota-I-unit

The door of your Toyota I-unit opens but painfully

In this case, there is a foolproof technique, which is used by all professionals. No need to go see a professional when that's just your hassle. We advise you to buy WD 40 then put a few pschitts on your lock and the lock.

Door opening problem from outside your Toyota I-unit

If it happens that the lock works and that nevertheless the door does not open it is that the malfunction must come from a dysfunction de cabling that there is between the handle and the opening device of this Toyota I-unit. In this case you are going to have to take a look in the bowels of the door. You will need to remove the fasteners from the cabin to get there. Assuming that the lock does not move anymore, it could be the lock case which has a malfunction. It remains likely that the lock remains seized, in this specific case you will have to use penetrating oil, which you can find at an unbeatable price on the amazon site. If ever the malfunction is not corrected, it will certainly change the lock of this Toyota I-unit and of course it will sometimes be rather expensive.

Door opening problem from inside your Toyota I-unit.

If you are going to be able to open from the outside but not from the inside, this indicates that this malfunction must most certainly come from a wiring malfunction. In this case, you must also open the door from the passenger compartment. Follow the cables that come from this door handle. In case the cable is broken it will have to be changed. By cons it is as imaginable as this cable is just relaxed, in this case you will have to reposition it so as to obtain a necessary rigidity so that the handle triggers the opening.

Problem opening the interior and exterior door of your Toyota I-unit.

Again it is advisable to test to insert WD40 before going to a professional. Assuming that the latter is not suitable at all, there will be no other option than to go to a garage to replace the lock. That's it, now you know a little more the reason why this Toyota I-unit has door problems. You can write a comment if ever this article served you! Good road.