The clutch has a fairly long service life. This inevitably varies depending on the vehicle range, however it is said that we could drive roughly 100 000 km without changing it. It is moreover likely to pull your hyundai santa fe to its entrenchments. The condition of the clutch is directly related to the use of the driver. So as to assimilate the concern related to this clutch , it is essential to understand how it works. Then we will find out how to properly carry out the control and what procedures can be applied.clutch-problem-hyundai-santa-fe

How a clutch works on a Hyundai Santa Fe

The clutch will make sure to make the connection between the engine and your wheels. When you drive in neutral, the engine no longer has any action on the wheels, which is obvious. This is located between the engine and the gearbox. Your clutch disc is between the flywheel on one side, and a diaphragm and pressure plate on the other hand. The diaphragm gives the opportunity to bring flexibility when disengaging. This is why there is no metallic blow. When the clutch is engaged, all of these elements separate and the engine therefore runs without load.

Hyundai Santa Fe: The main clutch malfunctions

The pedal of your hyundai santa fe is hard

In most cases, the clutch cable is frayed. It can also come from the clutch springs. In the first case it is likely to simply replace the cable. In the second, your mechanic will recommend that you replace the clutch kit whole, which is more admissible.

The clutch of your hyundai santa fe patina

If you ever press the accelerator, the engine goes up in the turns but your hyundai santa fe is heavy, it is likely that its clutch slips. Power losses are not inevitably linked to a clutch problem. If you ever have a lack of power, a hard pedal or a constraining clutch, this is certainly a skating . Do not wait too long to go to a garage if ever this is what is happening. This kind of concern will sometimes cause much larger malfunctions.

Hyundai Santa Fe: Gears Go Wrong

It is possible that it is only a gearbox problem. But the fact that it is fatally linked to the clutch, it is better to be careful. That it concerns only one of the two is worth quite a lot. Better to replace one or the other. To determine the concern, it is best to check if the clutch is worn. If the concern comes from the gearbox, we advise you to drain oil. You can go to a specialist if the problem persists, the consequences can be significant.

Checking a clutch of Hyundai Santa Fe

We can find a solution to find out if your clutch is working properly. You need to light your vehicle in 3rd or 4th, then disengage slowly. If your vehicle never stalls or stalls late enough, your clutch is definitely failing. On the other hand, the reverse does not mean that it is in perfect condition. Leave us a comment in case this guide helped you. Enjoy again!