The clutch has a rather long service life. It depends on the car models, however it is said that we could drive around 100 000 km without having to replace it. It is also conceivable to push the jeep wrangler to its limits. The state of wear of the clutch is automatically linked to the conduct of the driver. To understand the dysfunction related to your clutch , it is essential to know how it works. Then we will see how to properly perform a diagnosis and what procedures are offered to you.jeep-wrangler-clutch-problem

How a clutch works on a jeep wrangler

The clutch is used to make a connection between the engine block and your wheels. When you drive in neutral, the engine block no longer interacts with the wheels, which you already know. It is located between the engine block and the gearbox. The clutch disc is located between the flywheel on one side, and a diaphragm and pressure plate on the other side. The diaphragm provides flexibility when disengaging. It is thanks to him that there is no mechanical rap. When the clutch is pressed, all of these elements separate and the engine block therefore operates empty.

Jeep wrangler: The main clutch malfunctions

The pedal of your jeep wrangler is hard

Generally, it is because of the clutch cable that is frayed. This can also be caused by the clutch springs. In the first case it is conceivable to simply replace the cable. For the other, your mechanic will recommend that you replace the clutch kit whole, which is more reasonable.

Your jeep wrangler's clutch is slipping

If you press the accelerator, the engine block climbs in the turns but the jeep wrangler is heavy, it is conceivable that its clutch slips. Power losses are not necessarily linked to a clutch malfunction. If you have a lack of power, a hard pedal or a complicated clutch, this is probably a skating . Do not delay going to a mechanic when it is right. Such a malfunction could cause larger malfunctions.

jeep wrangler: The gears go wrong

It happens that it only concerns a gearbox malfunction. But the fact that the latter is inevitably linked to the clutch, it is better to remain cautious. Whether it is one or the other, it is rather expensive. It is better to replace one or the other. In order to diagnose the malfunction, it is best to check if the clutch is worn. If the malfunction comes from the gearbox, we advise you to drain oil. Do not hesitate to go to a professional when the dysfunction does not disappear, the consequences can be quite serious.

Checking a jeep wrangler clutch

We can find a method to understand if your clutch is working at its best. You will have to start in third or fourth, then disengage slowly. If your vehicle does not stall or stalls rather late, it is because the clutch is defective for sure. On the other hand, the reverse does not mean that it is in perfect condition. You can write a comment if this guide has helped you. Enjoy again!