The clutch has a rather long service life. It inevitably varies depending on the car model, however it is said that we can drive around 100 000 km without changing it. It is also conceivable to push the Toyota Land Cruiser Serie 90 until its last days. The state of wear of the clutch is directly related to the conduct of the driver. So as to measure the dysfunction linked to this clutch , it is essential to understand how it works. And then we will see how to properly carry out a diagnosis and what solutions you can apply.clutch-problem-Toyota-Land-Cruiser-Serie-90

How a clutch works on a Toyota Land Cruiser Serie 90

The clutch will make the connection between the engine and your wheels. When you are driving in neutral, the engine has no action on the wheels, which is obvious. This is located between the engine and the gearbox. Your clutch disc is between the flywheel on the one hand, and a diaphragm and pressure plate on the other side. The diaphragm will allow flexibility to be released. This is why there is no metallic rap. When you engage, all these elements separate and the engine therefore runs idle.

Toyota Land Cruiser Serie 90: The main clutch concerns

The pedal of your Toyota Land Cruiser Serie 90 is hard

Generally, it is related to the clutch cable which is damaged. It can also come from the clutch springs. In the first case it remains conceivable to replace only the cable. For the other, your auto repairer will recommend that you replace the clutch kit complete, which makes more sense.

The clutch of your Toyota Land Cruiser Serie 90 is slipping

When you accelerate, the engine climbs in revs but the Toyota Land Cruiser Serie 90 is dragging a bit of the leg, it is conceivable that the clutch slips. The power holes are not necessarily linked to a clutch malfunction. When you experience a loss of power, the hard pedal or a complicated clutch at the same time, it is probably a skating . Do not wait too long to go to an auto repairer when it is right. This kind of dysfunction will be able to cause more serious concerns.

Toyota Land Cruiser Serie 90: The gears go wrong

It happens that it only concerns a gearbox malfunction. But the fact that it is resolutely linked to the clutch, it is better to be careful. That it is only one of the two is worth quite a lot. It is better to replace only one of the two. To diagnose the malfunction, it is better to check if the clutch is damaged. If the malfunction comes from the gearbox, we advise you to drain oil. You can go to a garage when the malfunction persists, the consequences can be quite serious.

Checking a clutch of Toyota Land Cruiser Serie 90

There is a method to find out if the clutch works best. You will have to start in 3rd or 4th, then release your clutch little by little. When your vehicle does not stall or stalls late enough, your clutch is definitely defective. However, the opposite does not mean that it is in good condition. Do not hesitate to leave a comment if you have ever used this post. Enjoy again!