The timing belt happens to be one of most essential elements of a car. That said, if you don't pay too much attention, a broken belt could lead to serious engine problems. Everyone has already heard that it is necessary to change the timing belt, on the Volvo 66 or on any model of car. In order to fully understand the subject, we will take a look at the question about the timing belt: What is it for, for what purpose to change it, when to change it, and finally what to do to change it. Here is our special article timing belt!
What is the purpose of a timing belt on a Volvo 66?
In order to know the action of the belt of this Volvo 66, it is necessary to understand what the famous distribution. In fact, distribution is the totality of mechanical components which controls the admission phase (the valves) of the air-fuel mixture, But also exhaust. The timing belt is a toothed belt, driven through the crankshaft pinion, which subsequently drives the pulley camshaft. Depending on the car ranges, it may also call the pulley of the injection pump and the pulley of the water pump within most of the systems. Basically, it is the timing belt that will allow to drive the pistons and various parts of the engine block so synchronized.
Why change the timing belt on a Volvo 66?
Due to its consistency in caoutchouc, the distribution belt wears out over time. If you drive badly, the belt becomes much less malleable and much less robust. This phenomenon is more and more important if you live in urban areas, with repeated starts. If, on the contrary, you drive little, the belt could deform if she remains in a stable position day and night. If ever a strap comes loose or comes off, it triggers a engine stop at once. In addition, with the contraction, it can deteriorate some components of the engine block. It is therefore essential to pay attention to it. We will now see when to change it.
When to change the timing belt on a Volvo 66?
The problem with the belt is that it does not have a wear indicator. It is therefore complicated to judge its state, especially since it is difficult to access in the engine. The easiest way not to create an engine block breakage is to read the manufacturer's information. On the other hand, it is sometimes essential to trust the mechanics. It is usually recommended to change them every 100 000 kilometers, or every 5 years. Some causes, such as coolant or oil leaks, will deteriorate the belt prematurely.
How to change the timing belt on a Volvo 66?
Changing the timing belt on a Volvo 66 is not easy. Certainly, it is an essential part of the engine block, in fact when it is not properly done, it will inevitably cause major damage to the vehicle. Such a repair is therefore not recommended without the presence of a mechanic. In order to change the timing belt, you will first have to buy the distribution kit full. We therefore suggest the steps to follow to change the famous belt:
- Loosen the tensioner pulley if you want to loosen the belt.
- Release the timing belt.
- Disassemble all the roller rollers and the water pump.
- Replace the new water pump in its place
- Return the rollers to their respective locations
- Put the timing belt in its location following the marks
- Tighten the belt respecting the recommended tension using a tensiometer
- Operate the engine block manually, which corresponds to 4 city turns
Conclusion
It therefore seems essential to know several points before embarking on any work. The belt happens to be a essential engine element, it is this which makes it possible to synchronize various parts. Its inevitable degradation means that it must be changed very often. If we delay really, the whole thing could irrevocably damage the engine. And finally, it is essential to have very good mechanical skills to engage in this work. Voila, the key is now in your hands. Good road !