A turbo noise on your Smart Crossblade will sometimes get worse and cause serious problems, even a breakdown of the turbo. It therefore remains necessary to understand what caused the concern in order to take the necessary measures. At first we will see various Tricks in order to properly maintain the turbo, then what will be the causes of these noises and how to fix it.whistling-turbo-Smart-Crossblade

Turbo noise: a few tips

Turbo problems can be avoided. Here are several techniques to properly maintain it or change their behavior to protect it. In order to protect the turbo from this Smart Crossblade, we advise you not to press the accelerator too hard during ignition. Wait until the vehicle is on before accelerating. Check the oil level every 30 000 km approximately. The sewage of course have a profitable impact on your turbo.

Turbo whistling on the Smart Crossblade: what causes it

We will now go around the most common noises on a Smart Crossblade. In this way you will be able to correctly perceive the source of this noise in question.

The turbo of your Smart Crossblade makes noise all the time

If the turbo produces noise in all cases, there is clearly a concern. This sound should come when the turbo is pressurized. This is most often linked to a lack of lubrication of the system. Have it examined by your professional for a thorough examination. If the turbo of your Smart Crossblade is completely damaged, you will probably have to change it. Often this concern is accompanied by an indicator light on your dashboard.

Smart Crossblade: Noise on acceleration

The turbo of this Smart Crossblade generates a kind of whistle when you press the accelerator. This concern can come from two major causes. This is probably due to a supply hose or the pierced exchanger. It is plausible that the sound you hear is more like a breath than a hiss. If this is the case, a visual check will be necessary to identify the malfunction. You can change the hose if necessary, or change the exchanger if it is pierced.

Smart Crossblade: Noise on deceleration

If the turbo of your Smart Crossblade makes a deceleration sound, the turbo is still working! There is no real reason for the turbo to make noise only when decelerating. The noise from the engine block probably covers that of your turbo as soon as you step on the gas. It is however plausible that your engine generates a sound as soon as you decelerate, but it probably does not come from your turbo. No doubt a concern for admission?

Smart Crossblade: Metallic noise from the turbo

A metallic sound from the turbo of your Smart Crossblade must come from a mechanical problem. So that means your turbo is in bad shape! Do not wait too long before going to a garage. Breaking a turbo can cause much more serious problems, and it's expensive to replace.