Your FAP light is on and you don't know where the problem is coming from. The FAP is mainly found for vehicles Diesel, even if we find them today for gasoline vehicles. Before attempting repairs For this Toyota Auris, it remains essential to know where the concern came from. What is the role of a particle filter? Why does the light go on? What can be the most frequent concerns? In this text, we will go around the subject. indicator-fap-Toyota-Auris

What is a FAP used for on your Toyota Auris

As its name suggests, it is used to purify microscopic particles toxiques of your engine. These kinds of particles are so small that they easily enter our body. For information, it's Peugeot who manufactured the particulate filter. Your catalyst has the role of reducing the quantity of particles produced from the engine block, while the FAP collects the rest. It therefore seems necessary to have a FAP in good condition if you no longer want this Toyota Auris to pollute.

Why the FAP indicator light on your Toyota Auris

The FAP of your Toyota Auris is clogged

This is the most common problem. No worries, a FAP clogs the more time passes. The particles pile up and then interfere with the proper circulation of your exhaust gases. Normally, the FAP of this Toyota Auris must purge itself and therefore make the clusters disappear. That said, if the latter is old it is essential to replace it with a new one.

An electronic problem

The problem with these LEDs is that you are by no means sure that there is a problem. In fact, it regularly appears that an indicator light shines while this Toyota Auris turns perfectly. This FAP has electronic sounders that send a warning to the dashboard. If these probes have a problem while this FAP is going well, it is possible that the LED is on.

What to do if the FAP indicator light on your Toyota Auris lights up?

To start, it is absolutely forbidden to remove the fap from your Toyota Auris! It is punishable by law. You will need to check the sounders to see if they are working properly. In case these work properly, the problem comes from the Particulate filter. If the latter turns out to be filthy, it can be cleaned by driving on over speed for about 10 minutes. Do not climb too much into the towers, it could damage the vehicle. It is advisable to drive at 3000 rpm. The engine block temperature should burn this stored dirt in this way and release the FAP. When this technique is not suitable, you will have to replace it with a new one.

Conclusion:

Your fap in bad condition will pollute but also decrease acceleration. It is therefore essential to take care of it. Post a comment if our article has ever been useful. Good road !