Now we find the turbos on a lot of cars in circulation, whether it's engines essences ou Diesel. Before starting this task it is of course necessary to be convinced that the concern arises from the turbo of your Jeep Renegade. That said, if you are reading to us, it shows that you probably know the reason.change-turbo-Jeep-Renegade

How to change the turbo on your Jeep Renegade

Compared to the turbo to be positioned, manipulations can vary a little. When you buy a turbo, the product is usually delivered with an assembly note. So the best thing to do is to follow it step by step. However, in the event that you have not yet made the purchase, these are the main axes for replacing a turbo compressor on the Jeep Renegade. Therefore you will know if you can or not. Before starting, make sure you have all of the tools required. You are going to need an oil bucket, a bunch of ratchet wrenches, your flat pliers, allen wrenches as well as flat wrenches. Generally, turbos will be supplied with a lot of utensils which includes joints, studs but also a little oil. We still recommend that you go see a professional since working from a pit is much easier to carry out the manipulations. In addition, the turbo is a particularly fragile element for the Jeep Renegade. Taking into account that the operation is not extremely complex, we still advise you to go to a specialist.

  • Drain the engine block and replace your oil filter. Replace a little oil, without putting too much. This is a necessary phase!
  • Remove all the plugs found on the turbo of this Jeep Renegade.
  • Check that there are no undesirable elements inside the casings, since this is sometimes a source of concern.
  • Remove the conduits but also all the screws and nuts that will hold your turbo.
  • Remove the faulty turbo from your Jeep Renegade.
  • Fit the new turbo, checking that the joints fully match
  • Refit the oil return pipe
  • Reassemble all the screws and nuts that you removed
  • Fill the turbo using oil from your syringe
  • Operate the turbine by hand so as to activate the turbo.
  • Assemble all the components to the turbo of your Jeep Renegade.
  • Once all of the parts turn out to be installed, you can start the engine block and operate it for 5 to 10 minutes.

Once everything is installed and screwed and of course the engine has been running for at least 5 minutes, it is possible to walk around behind the wheel of your Jeep Renegade so that you can see that everything is working properly. We also advise you to check the quantity of oil but also of water quite often in the days to come. Write a comment if this tutorial helped you. See you soon !