As soon as we lose power, or that the engine block makes a noise special, it is common to hear around us that it must be a malfunction of turbo. You will be surprised, however the latter are most often mistaken. A turbo will of course be able to break down, which is not uncommon. But usually the problem depends on an element in connection with the turbo. Before you go directly to a mechanic to change your turbocharger, it is useful to understand how a turbo works and which turn out to be the troubles the most frequent, so identify yours.problem-turbo-Smart-Crossblade

How a Smart Crossblade turbo works

Everyone suspects it, and its designation implies, the turbo is used to increase the capacities from an engine block. Although it arrived in the industry relatively late, the turbo was designed in 1905. Its major constituent turns out to be its turbines. Indeed, it is the exhaust gases whose temperature is high that give the possibility to this turbine to turn. On the other side, air will be emitted by the turbine and compress in order to be sent to the heart of the engine of this Smart Crossblade. Indeed, an engine requires a cocktail of air and petrol to turn. A greater amount of air means a little more power, without having to mount the vehicle in the towers. Pretty clever isn't it?

The most common problems on a Smart Crossblade turbo

There are 3 major causes that will be found to cause turbo worries.

  • Insufficient oil, necessary for the turbine to rotate perfectly.
  • Oil infected, for the same principle
  • The introduction of various things into the heart of the turbo: it will sometimes create major concerns.

Engine power loss on your Smart Crossblade

It may indeed be due to a damaged turbo. However, the malfunction will sometimes come from elsewhere, such as a blocked air filter, an injector in poor condition, a dirty compressor, a valve malfunction ... The list goes on!

Black smoke in the exhaust

Indeed, it is not necessarily a turbo malfunction. The causes could be relatively similar: such as a malfunction of the air filter, the exhaust manifold, your dirty injectors ... This time too, the list is long.

Your Smart Crossblade's turbo makes an unusual noise

This time you think we are exaggerating, however the turbo of this Smart Crossblade will sometimes emit noise because other components of the engine block have concerns. Such as leaks from the exhaust, or even a dirty compressor. Assuming these work ethically you will most likely have to replace your turbo.

Conclusion

As you can understand, it's not easy to diagnose a turbo malfunction on a Smart Crossblade. Now that you know a little more, you should do some research before replacing your turbo. the problem does not necessarily come from him. If you feel certain of yourself, we advise you to go to a mechanic because replacing his turbo is not at all simple. Hope this text helped you, and have a good ride!