The clutch and the steering are the two mechanical devices that the motorist controls. One has said that it tends to deteriorate faster than the other: it is the clutch system obviously. With of course the gearbox, which goes with it. It happens relatively regularly that gearshift problems occur on the + str (XXX) +. And even if the clutch is often the cause, sometimes we have surprises about the source of the problems. Also, it sometimes avoids replacing the complete kit. These are the gear change issues The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears no longer changes. Or only even or odd speeds. In this case, the clutch is in poor condition. However, this is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber which holds it. The problem can also arise from the gearbox. It can be put down to check that nothing outside is blocking it. If it is damaged, you must change it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly frequent problem. Since the engine block is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The problem comes from the clutch. Usually it will be essential to replace the complete clutch kit. You can still disassemble it and check the condition of all components. As a reminder, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off as on, it's really unpleasant. One thing to check is the condition of the gearbox of your + str (XXX) +. There may be a good chance that the latter is HS. In order to understand where the problem comes from it is rather simple. If you can put the lever in the guide of one of the gears, but the gear does not engage, the clutch is probably the problem. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. In either case, you most likely need to replace one or more parts.