Clutch and steering are the two mechanical systems that the driver controls. One has said that it wears out faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which is closely linked. It happens quite regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, sometimes we are surprised at the reason for the problems. In addition, this avoids changing the complete kit from time to time. These are the gear change issues The most common.speed-pass-more-Citroen-Spacetourer

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is in poor condition. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the malfunction comes from a link or a rubber that holds it. The malfunction can still come from the gearbox. You can disassemble it to check that no external component is blocking it. If the latter is damaged, it must be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a rather common malfunction. Since the engine block is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine block has started, it is impossible. The malfunction comes from the clutch. Usually it will be advisable to change the complete clutch kit. You can try to drop it and look at the status of each of the components. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really unpleasant. The first thing to look at is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that the latter is HS. To discern where the dysfunction came from it's quite simple. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which probably has a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction probably comes from the gearbox. For both, it will most certainly change one or more rooms.