Clutch and steering are the two mechanical systems that the driver controls. One, however, is used to deteriorating faster than the other: it is the clutch mechanism naturally. Of course with the gearbox, in close connection. Quite frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the reason for the malfunctions. In addition, it avoids from time to time to change the whole kit. So these are the gearshift malfunctions The most common.speed-pass-more-Hyundai-I-blue

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. But it is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It may be that the problem comes from a link or a rubber that holds it. The problem can still arise from the gearbox. You can dismantle it to check that no foreign element is blocking it. If it is damaged, it will have to be changed.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a rather recurring concern. Since the engine is off it is possible to shift your gears, that means that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The problem stems from the clutch. In general it will be essential to replace the entire clutch kit. You can try to remove it and check the condition of all the parts. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine stopped or running, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to discern where the concern came from, it's quite easy. If you can put the lever in the guide of a speed, but that the speed does not engage, it is the clutch which certainly holds a concern. If the lever seems blocked and you cannot push it, the problem probably comes from the gearbox. For both, it will most certainly replace one or more parts.