Clutch and steering are the two mechanical systems that the motorist controls. One, however, is used to being damaged more quickly than the other: it is the clutch system of course. Obviously with the gearbox, which goes with it. It happens rather regularly that gearshift problems occur on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the cause of the problems. In addition, it sometimes avoids replacing the entire kit. So here are the gear change issues the most common.speed-pass-plus-Hyundai-I30- (3rd-Generation) -N

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign element is blocking it. If the latter is defective, you must change it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, it means that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem comes from the clutch. Usually it will be essential to replace the entire clutch kit. You can always remove it and check the condition of all parts. For information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off or in working order, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be HS. In order to understand where the problem comes from it's relatively easy. If you can push the lever into the guide of a speed, but it does not take, the clutch is probably a problem. If the lever seems to be blocked and you cannot push it, the problem is certainly caused by the gearbox. For both, you most likely need to replace one or more parts.