The clutch and steering are two mechanical devices that the driver steers. One, however, tends to get damaged faster than the other: it is the clutch mechanism naturally. With in particular the gearbox, which is closely linked. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we have surprises about the reason for the problems. In addition, this at times avoids replacing the complete kit. So these are the gear change issues the most regular.speed-pass-more-Hyundai-Ix55

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer changes. Or just even or odd speeds. In this situation, the clutch is worn. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. You can disassemble it to check that nothing outside is blocking it. If it is damaged, it will have to be changed.

Unable to shift gear once the + str (XXX) + engine is running

It is unfortunately a fairly recurrent dysfunction. Since the engine is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The malfunction is due to the clutch. Usually it will be necessary to replace the complete clutch kit. You can try to deposit it and check the condition of all the parts. For information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off or in working order, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. There may be a high probability that it will be out of service. To understand where the dysfunction came from it's relatively easy. If you can push the lever into the guide of one of the gears, but it does not take, it is the clutch which certainly has a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction probably comes from the gearbox. In both cases, you will most likely need to replace one or more parts.