The clutch and the steering are two mechanical systems that the motorist directs. One, however, is used to damaging faster than the other: it is the clutch device of course. With of course the gearbox, which goes with it. Quite frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the problems. In addition, it avoids from time to time to change the whole kit. Here are the gear change issues the most common.speed-pass-more-Hyundai-Kona

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. As a result, the clutch is in poor condition. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. It is possible to remove it to check that no external component is blocking it. If it is damaged, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly frequent malfunction. Since the engine is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The malfunction is due to the clutch. Generally it will be essential to change the entire clutch kit. You can try to disassemble it and check the condition of all parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be a good chance that it will be out of service. In order to understand where the malfunction comes from it's pretty simple. If you can push the lever into the guide of one of the gears, but it does not engage, it is the clutch which probably presents a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction is certainly due to the gearbox. For both, you most certainly need to change one or more rooms.