The clutch and steering are two mechanical devices that the driver steers. One, however, tends to deteriorate faster than the other: it is the clutch device of course. Obviously with the gearbox, which goes with it. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the reason for the concerns. In addition, it avoids at times having to change the complete kit. These are the gearshift concerns the most common.speed-pass-more-Hyundai-Pony

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber which holds it. The problem can also arise from the gearbox. It can be disassembled to check that no foreign element is blocking it. If it is damaged, you must change it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly recurring problem. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block has started, it is impossible. The problem stems from the clutch. Often it will be advisable to replace the complete clutch kit. You can try to remove it and look at the condition of all the parts. For information, it is still advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There may be a good chance that the latter is HS. To understand where the problem comes from is relatively easy. If you can push the lever into the guide of one of the gears, but it does not take, the clutch is probably the problem. If the lever seems to be stuck and you cannot push it, the problem is certainly due to the gearbox. In either case, you will most likely need to replace one or more parts.