The clutch and the steering are two mechanical devices that the motorist controls. One said that the habit of getting damaged faster than the other: it's the clutch mechanism of course. With in particular the gearbox, which is closely linked. It happens quite regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is often involved, it happens that we are surprised at the reason for the concerns. In addition, this sometimes avoids having to change the entire kit. So here are the gearshift concerns the most usual.speed-pass-more-Hyundai-Portico

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not inevitably due to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the marigold comes from a link or from a rubber which holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If it is defective, it must be replaced.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common concern. Since the engine is off it is possible to shift your gears, this means that the + str (XXX) + gearbox is operational. Once the engine is started, it is impossible. The concern comes from the clutch. Usually it will be necessary to replace the entire clutch kit. You can try to disassemble it and check the condition of all the parts. As a reminder, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to understand where the worry is coming from it's quite easy. If you can push the lever in the guide of one of the gears, but it does not engage, it is the clutch which probably holds a problem. If the lever seems blocked and you cannot push it, the problem certainly comes from the gearbox. In both cases, it is most certainly necessary to replace one or more parts.