Clutch and steering are two mechanical systems that the driver controls. One is nonetheless used to wear out faster than the other: it is the clutch device of course. With in particular the gearbox, which is closely linked. Quite frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the source of the malfunctions. Also, this prevents from time to time changing the entire kit. Here are the gearshift malfunctions the most usual.speed-pass-more-hyundai-santa-fe

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can also occur from the gearbox. It can be disassembled to check that no external component is blocking it. If it is defective, it must be replaced.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common malfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine is started, it is impossible. The malfunction is due to the clutch. Generally it will be necessary to change the entire clutch kit. You can always dismantle it and check the condition of all the parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. To discern where the dysfunction came from it's relatively easy. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch which certainly presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it is very likely to change one or more parts.