The clutch and the steering are two mechanical systems that the motorist directs. One said that the habit of getting damaged faster than the other: it is the clutch device naturally. In particular with the gearbox, in close connection. Rather regularly, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we have surprises about the cause of the malfunctions. In addition, this avoids changing the complete kit from time to time. Here are the gearshift malfunctions the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is in poor condition. However, this is not inevitably due to the whole of the clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. It can be disassembled to check that no foreign component is blocking it. If it is damaged, it will have to be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring concern. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine is started, it is impossible. The concern comes from the clutch. Generally it will be necessary to change the complete clutch kit. You can try to disassemble it and check the condition of all the parts. For information, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped as lit, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. There may be a high probability that it will be out of service. To understand where the problem comes from, it's pretty simple. If you can push the lever into the guide of a speed, but it does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, it will most likely have to change one or more parts.