Clutch and steering are two mechanical systems that the motorist controls. One, however, is used to damaging faster than the other: it is the clutch device of course. Obviously with the gearbox, which is closely linked. It happens quite regularly that gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the reason for the malfunctions. Also, it avoids from time to time to change the complete kit. So here are the gearshift malfunctions the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. But that is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. You can disassemble it to check that nothing outside is blocking it. If it is damaged, you must replace it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring concern. Since the engine block is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine block is on, it is impossible. The concern comes from the clutch. Often it will be necessary to replace the complete clutch kit. You can always remove it and check the condition of all the components. As a reminder, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine off or in working order, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be out of service. In order to understand where the problem comes from, it's rather simple. If you can push the lever into the guide of a speed, but the speed does not take, it is the clutch which certainly presents a problem. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. In either case, you most likely need to replace one or more parts.