The clutch and the steering are the two mechanical devices that the motorist controls. One said that it wont deteriorate faster than the other: it is the clutch device of course. With of course the gearbox, which goes with it. It happens rather regularly that concerns of gear changes happen on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the cause of the concerns. In addition, it avoids from time to time to change the whole kit. These are the gearshift concerns the most regular.speed-pass-more-Jeep-Comanche

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the concern comes from a link or a rubber which holds it. The problem can also come from the gearbox. It is possible to disassemble it to check that no foreign element is blocking it. If the latter is defective, you must change it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common concern. Since the engine is off it is possible to shift your gears, that means that the gearbox of the + str (XXX) + is operational. Once the engine is running, it is impossible. The concern must come from the clutch. Generally it will be necessary to replace the entire clutch kit. You can try to remove it and check the condition of all components. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off or in working order, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. Chances are that it will be HS. To understand where the problem comes from it's quite simple. If you can push the lever in the guide of a speed, but that this does not take, it is the clutch which probably holds a concern. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In either case, you most likely need to replace one or more parts.