The clutch and the steering are two mechanical devices that the motorist directs. One, however, is used to damaging faster than the other: it is the clutch device naturally. With of course the gearbox, which goes with it. It happens relatively frequently that gearshift concerns occur on this + str (XXX) +. And even if the clutch is often involved, it happens that we are surprised at the reason for the concerns. In addition, it avoids at times having to change the whole kit. Here are the gearshift concerns The most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is in poor condition. But that is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. The malfunction may come from a link or from the rubber that holds it. The malfunction can also occur from the gearbox. It is possible to disassemble it to check that no external component is blocking it. If it is damaged, you must replace it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a rather recurring dysfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The malfunction is due to the clutch. In general it will be essential to change the entire clutch kit. You can try to remove it and check the condition of all components. For information, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off as on, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that it will be out of service. In order to discern where the dysfunction came from it's quite easy. If you can push the lever in the guide of one of the gears, but it does not take, it is the clutch which probably has a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction probably comes from the gearbox. For both, you most certainly need to change one or more rooms.