Clutch and steering are the two mechanical systems that the motorist controls. One said that the habit of getting damaged faster than the other: it is the clutch mechanism of course. In particular with the gearbox, in close connection. It happens quite regularly that problems with speed changes occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the problems. In addition, this at times avoids replacing the complete kit. So here are the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is in poor condition. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It is possible to remove it to check that no external element is blocking it. If it is damaged, it must be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a rather recurring concern. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The concern comes from the clutch. In general it will be essential to change the complete clutch kit. You can always remove it and look at the status of all components. For your information, it is still recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped or in working order, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. To understand where the problem comes from, it's pretty simple. If you can push the lever in the guide of a speed, but that this does not take, it is the clutch which certainly holds a concern. If the lever seems blocked and you cannot push it, the problem probably comes from the gearbox. For both, it is most certainly necessary to change one or more rooms.