Clutch and steering are the two mechanical systems that the motorist controls. One, however, is used to deteriorating faster than the other: it is the clutch device naturally. Obviously with the gearbox, which goes with it. Rather frequently, gearshift concerns arise on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we have surprises about the reason for the concerns. Also, it sometimes avoids replacing the complete kit. So here are the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears no longer shifts. Or just even or odd speeds. As a result, the clutch is in poor condition. However, this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It happens that the concern comes from a link or a rubber which holds it. The problem can also come from the gearbox. You can disassemble it to check that no external component is blocking it. If it is damaged, you must replace it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly common concern. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine is running, it is impossible. The problem stems from the clutch. In general it will be necessary to replace the complete clutch kit. You can try to deposit it and check the condition of all the parts. For information, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off or in working order, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to understand where the problem comes from, it's relatively simple. If you can push the lever in the guide of one of the speeds, but it does not take, it is the clutch which certainly holds a concern. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most certainly need to replace one or more parts.