The clutch and the steering are the two mechanical devices that the motorist controls. One said it wont be damaged faster than the other: it is the clutch system of course. Of course with the gearbox, in close connection. It happens quite regularly that gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the source of the malfunctions. Also, it avoids from time to time to replace the complete kit. These are the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is in poor condition. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. It is possible to dismantle it in order to check that no foreign component is blocking it. If it is damaged, you must change it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem comes from the clutch. Often it will be essential to change the complete clutch kit. You can always remove it and check the condition of all the parts. As a reminder, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine stopped as lit, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. There may be a high probability that the latter is HS. To understand where the problem came from, it's relatively simple. If you can put the lever in the guide of one of the gears, but it does not engage, it is the clutch that probably has a problem. If the lever seems to be stuck and you cannot push it, the problem is probably caused by the gearbox. In both cases, you most certainly need to change one or more parts.