Clutch and steering are two mechanical systems that the motorist controls. One nevertheless has the habit of getting damaged faster than the other: it is the clutch device of course. Obviously with the gearbox, in close connection. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that there are surprises about the cause of the problems. In addition, it avoids from time to time to change the complete kit. So these are the gearshift concerns The most common.speed-pass-more-Kia-Cee-D

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is damaged. But it is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can also occur from the gearbox. It is possible to dismantle it in order to check that no foreign component is blocking it. If it is defective, it must be replaced.

Unable to change gear once the + str (XXX) + engine is started

It is unfortunately a rather frequent dysfunction. Since the engine is off, it is still possible to shift your gears, this means that the + str (XXX) + gearbox is operational. Once the engine is running, it is impossible. The malfunction comes from the clutch. In general it will be advisable to change the complete clutch kit. You can still remove it and check the condition of all parts. As a reminder, it is still recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really unpleasant. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be out of service. To understand where the malfunction comes from it's quite simple. If you can push the lever into the guide of a speed, but the speed does not take, it is the clutch which certainly presents a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction certainly comes from the gearbox. For both, it is most certainly necessary to change one or more rooms.