The clutch and steering are two mechanical devices that the driver controls. One, however, is used to deteriorating faster than the other: it is the clutch system of course. With in particular the gearbox, which is closely linked. Quite frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the source of the malfunctions. In addition, it avoids at times having to change the complete kit. Here are the gearshift malfunctions The most common.speed-pass-more-Kia-Pop

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. The problem may be with a link or a rubber that holds it. The problem can still come from the gearbox. It is possible to disassemble it to check that no external component is blocking it. If it is damaged, you must change it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common problem. Since the engine is off, it is still possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine is started, it is impossible. The problem must come from the clutch. Usually it will be necessary to replace the complete clutch kit. You can always dismantle it and check the condition of all the components. As a reminder, it is still advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be out of service. In order to understand where the problem comes from it is rather easy. If you can put the lever in the guide of a speed, but that it does not take, it is the clutch which certainly has a problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. In either case, you will most likely need to replace one or more parts.