The clutch and steering are the two mechanical devices that the driver controls. One said that it wont deteriorate faster than the other: it's the clutch system of course. With of course the gearbox, which goes with it. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the source of the problems. In addition, this sometimes avoids changing the complete kit. So these are the gearshift concerns The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears no longer shifts. Or only even or odd speeds. Therefore, the clutch is worn. But this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. You can drop it to check that no foreign component is blocking it. If it is damaged, you must change it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent problem. Since the engine is off, it is still possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem comes from the clutch. In general it will be advisable to change the complete clutch kit. You can still remove it and check the condition of all components. For information, it is still recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off as on, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that the latter is HS. In order to understand where the problem comes from it's quite easy. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch that probably presents a problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. In both cases, you most likely need to change one or more parts.