The clutch and the steering are the two mechanical devices that the motorist controls. One, however, is used to wear out faster than the other: it is the clutch system of course. With of course the gearbox, which is closely linked. It happens rather regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the reason for the problems. In addition, this at times avoids replacing the complete kit. Here are consequently the gear change issues the most regular.speed-pass-more-Kia-Rio-4

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. But this is not inevitably due to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can still come from the gearbox. It is possible to remove it in order to check that no foreign component is blocking it. If it is damaged, it will need to be replaced.

Unable to change gear once the + str (XXX) + engine is started

It is unfortunately a rather frequent dysfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The malfunction comes from the clutch. Usually it will be advisable to change the complete clutch kit. You can always disassemble it and look at the condition of all the parts. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off or in working order, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. Chances are that it will be HS. In order to understand where the dysfunction came from it's quite easy. If you can push the lever in the guide of one of the gears, but it does not engage, it is the clutch which probably holds a malfunction. If the lever seems blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it will most likely be necessary to change one or more parts.