The clutch and the steering are two mechanical devices that the motorist directs. One, however, is used to damaging faster than the other: it is the clutch system of course. Obviously with the gearbox, in close connection. It happens relatively regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the problems. In addition, this at times avoids replacing the entire kit. So here are the gear change issues the most usual.speed-pass-more-Kia-Sephia

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. It is possible to deposit it to verify that no foreign element is blocking it. If it is defective, it will have to be changed.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem comes from the clutch. Usually it will be necessary to change the entire clutch kit. You can always remove it and look at the status of all the components. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off or in working order, it's really annoying. The first thing to look at is the state of the gearbox of your + str (XXX) +. There may be a good chance that it will be out of service. To discern where the problem is coming from it's pretty easy. If you can push the lever into the guide of a speed, but the speed does not engage, the clutch is probably a problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. For both, it will most likely have to change one or more parts.