The clutch and steering are two mechanical devices that the driver steers. One said that the habit of deteriorating faster than the other: it is the clutch mechanism naturally. With of course the gearbox, which is closely linked. It happens rather regularly that gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, sometimes we have surprises about the cause of the problems. In addition, this occasionally avoids having to change the entire kit. So here are the gear change issues The most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is in poor condition. But this is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the marigold comes from a link or from a rubber which holds it. The problem can also arise from the gearbox. It is possible to deposit it to check that no foreign element is blocking it. If it is defective, you must change it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly common concern. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block has started, it is impossible. The concern comes from the clutch. In general it will be necessary to replace the entire clutch kit. You can still drop it and look at the status of all components. As a reminder, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off or in working order, it's really unpleasant. The first thing to look at is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to understand where the problem comes from, it's quite simple. If you can push the lever into the guide of a speed, but the speed does not engage, the clutch is probably the problem. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. For both, you most likely need to replace one or more parts.