The clutch and the steering are two mechanical devices that the motorist directs. One, however, is in the habit of deteriorating faster than the other: it is the clutch device of course. Obviously with the gearbox, in close connection. It happens rather regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, sometimes we are surprised at the source of the problems. In addition, this sometimes prevents the entire kit from being changed. Here are the gear change issues the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is in poor condition. But this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It sometimes happens that the problem comes from a link or from a rubber which holds it. The problem can also come from the gearbox. It can be removed to check that no external component is blocking it. If the latter is defective, it will have to be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine is running, it is impossible. The problem comes from the clutch. Generally it will be necessary to replace the entire clutch kit. You can try to disassemble it and check the condition of all the components. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off as on, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. The chances are that it will be out of service. To discern where the problem came from, it's relatively simple. If you can push the lever in the guide of a speed, but the speed does not engage, it is the clutch which certainly presents a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In both cases, you will most likely have to replace one or more parts.