Clutch and steering are the two mechanical systems that the motorist controls. One said that the habit of deteriorating faster than the other: it is the clutch mechanism naturally. With of course the gearbox, which is closely linked. It happens quite frequently that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the problems. Also, this prevents from time to time changing the entire kit. Here are consequently the gear change issues the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. But this is not inevitably linked to the whole clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also come from the gearbox. It is possible to remove it to check that no external component is blocking it. If it is damaged, you must change it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly recurring problem. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The problem comes from the clutch. Usually it will be essential to replace the entire clutch kit. You can always deposit it and check the condition of all the parts. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off as on, it's really unpleasant. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that this is HS. To understand where the problem comes from is pretty easy. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which holds undoubtedly a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most likely need to replace one or more parts.